Oil View more
1-layer oil RMC Cleaner

This cleaner is used after sanding and vacuum cleaning the untreated wood and before the application is started. With this cleaner you will be able to remove even the smallest dust particles; the perfect start of an impeccable finish.

This product can also be used to clean the used materials after the oil application.

22,25 €
1-layer oil RMC Exterior Wood Cleaner

For the cleaning of wooden patios, fences, exterior doors, carports, etc… Removes grey discolouration, mildew stains and dirt. Can be applied on all types of wood.New, weathered as well as treated wood must always be cleaned with Rubio Monocoat Exterior Wood Cleaner before applying one of our Exterior oils.

Advantages:

New wood: Grease that by nature appears in certain types of wood is removed. The natural pigment is cleansed and – as a result – the colour applied afterwards remains stable later on. The pores are opened, which provides more even results.
Weathered and treated wood:
The treatment will degrease and restore the wood. This results in a far more equal colour, which enables better management of the end result.
Do not use this product without consulting the full instruction and technical sheet.

 
20,52 €
1-layer oil RMC FR Base

The Rubio Monocoat FR Oil System is an effective combination of two fire-retardant products:
– RMC FR Base: fire-retardant primer
– RMC FR Oil: fire-retardant finishing oil

The unique characteristics of the RMC FR Oil System:
– No build-up of layers, no saturation.
– No solvents or water, 0% VOC.
– Available in all standard interior RMC-colours.
– Manual and industrial application.
– Recommended partner for the project market!
– Optimal performance: low consumption.

 

From 159,67 €
1-layer oil RMC FR Oil System

Certificate Bfl-s1 tested according to the standard EN 13501-1: EN ISO 11925-2 and EN ISO 9239-1.

The Rubio Monocoat FR Oil System is an effective combination of two fire-retardant products:
– RMC FR Base: fire-retardant primer
– RMC FR Oil: fire-retardant finishing oil

The unique characteristics of the RMC FR Oil System:
– No build-up of layers, no saturation.
– No solvents or water, 0% VOC.
– Available in all standard interior RMC-colours.
– Manual and industrial application.
– Recommended partner for the project market!
– Optimal performance: low consumption.

What makes the Rubio Monocoat FR Oil System so unique? 

Oil, no film forming 
The Rubio Monocoat FR Oil System is the first fire-retardant oil system in the world that has acquired a Bfl-s1 certification for oak. Because it is based on our technology, there is no build-up of layers as in many other existing systems.

No salts 
Research has shown that the inclusion of salts can significantly lower the durability of fire retardant systems Most fire-retardant systems contain salts. Our technology has enabled us to eliminate salts resulting in sustained product performance.

Limiting the development of smoke 
Statistics indicate that smoke considerably reduces the ability to rescue people. In developing this product, we’ve striven to the utmost extent to limit smoke development. Our system gets an s1-citation, which attests to a safer product.

Low consumption 
High spread rates and reduced product application have always been our goal. The Rubio Monocoat FR Oil System meets the economic criteria that we have set: the base consumes 35 g/m2, the oil 16 g/m2!

Please consult the technical leaflets of the Rubio Monocoat FR Base and the Rubio Monocoat FR Oil before application of the system.

* The colours are merely indicative. It is always recommended to make a sample in order to determine the exact colour. 

From 49,22 €
1-layer oil RMC Grease Remover

Rubio Monocoat Grease Remover is a ready-to-use product that removes recent grease stains from a surface treated with Rubio Monocoat Oil.The product should be applied immediately after the stain occurs, thereby preventing the grease from penetrating the surface.

14,92 €
1-layer oil RMC Hybrid Wood Protector

Rubio Monocoat Hybrid Wood Protector is a real ‘monocoat’. Its innovative properties make it suitable for all types of wood, both inside and outside.The simple application and non-complicated maintenance (without sanding!) makes this high technological product exceptionally easy to use.

The unique characteristics of Rubio Monocoat Hybrid Wood Protector:

– Based on RMC technology using integrated UV stabilizer.
– Easy to apply: no overlaps, fast-drying.
– Economical: 1-layer application, minimum consumption.
– Eco-friendly: no solvents, water or Volatile Organic Compounds (VOCs).
– Universal: suitable for all types of wood, inside and outside.
– Aesthetic: 10 contemporary wood colours and 8 trendy pop colours!

Maintenance without sanding: refreshment of colour and protection with the same product. No need for sanding!

 

From 16,42 €