Cleaning surfaces before finishing them with Rubio Monocoat oils ensures better end result. After sanding the dust and naturally occurring resins must be cleaned so that finishing oil may react right to the timber. Cleaning opens the pores of the wood, allowing the color to be more intensive and also makes surface smoother.
This cleaner is used after sanding and vacuum cleaning the untreated wood and before the application is started. With this cleaner you will be able to remove even the smallest dust particles; the perfect start of an impeccable finish.
This product can also be used to clean the used materials after the oil application.
For the cleaning of wooden patios, fences, exterior doors, carports, etc… Removes grey discolouration, mildew stains and dirt. Can be applied on all types of wood.New, weathered as well as treated wood must always be cleaned with Rubio Monocoat Exterior Wood Cleaner before applying one of our Exterior oils.
New wood: Grease that by nature appears in certain types of wood is removed. The natural pigment is cleansed and – as a result – the colour applied afterwards remains stable later on. The pores are opened, which provides more even results.
Weathered and treated wood:
The treatment will degrease and restore the wood. This results in a far more equal colour, which enables better management of the end result.
Do not use this product without consulting the full instruction and technical sheet.