1-layer oil RMC Soap
For routine cleaning of oiled floors. Thoroughly removes all dirt and grease without leaving a layer.Preserves the matt, natural appearance of the wood. Rubio Monocoat Soap is concentrated and therefore utmost economical.
For the cleaning of wooden patios, fences, exterior doors, carports, etc… Removes grey discolouration, mildew stains and dirt. Can be applied on all types of wood.New, weathered as well as treated wood must always be cleaned with Rubio Monocoat Exterior Wood Cleaner before applying one of our Exterior oils.
New wood: Grease that by nature appears in certain types of wood is removed. The natural pigment is cleansed and – as a result – the colour applied afterwards remains stable later on. The pores are opened, which provides more even results.
Weathered and treated wood:
The treatment will degrease and restore the wood. This results in a far more equal colour, which enables better management of the end result.
Do not use this product without consulting the full instruction and technical sheet.
Rubio Monocoat Oil Plus 2C is a next-generation oil that colours and protects your wood in 1 single layer. The combination of the oil (A) and the accelerator (B) ensures a quick dry, quick cure and superior protection.
Certificate Bfl-s1 tested according to the standard EN 13501-1: EN ISO 11925-2 and EN ISO 9239-1.
The Rubio Monocoat FR Oil System is an effective combination of two fire-retardant products:
– RMC FR Base: fire-retardant primer
– RMC FR Oil: fire-retardant finishing oil
The unique characteristics of the RMC FR Oil System:
– No build-up of layers, no saturation.
– No solvents or water, 0% VOC.
– Available in all standard interior RMC-colours.
– Manual and industrial application.
– Recommended partner for the project market!
– Optimal performance: low consumption.
What makes the Rubio Monocoat FR Oil System so unique?
Oil, no film forming
The Rubio Monocoat FR Oil System is the first fire-retardant oil system in the world that has acquired a Bfl-s1 certification for oak. Because it is based on our technology, there is no build-up of layers as in many other existing systems.
Research has shown that the inclusion of salts can significantly lower the durability of fire retardant systems Most fire-retardant systems contain salts. Our technology has enabled us to eliminate salts resulting in sustained product performance.
Limiting the development of smoke
Statistics indicate that smoke considerably reduces the ability to rescue people. In developing this product, we’ve striven to the utmost extent to limit smoke development. Our system gets an s1-citation, which attests to a safer product.
High spread rates and reduced product application have always been our goal. The Rubio Monocoat FR Oil System meets the economic criteria that we have set: the base consumes 35 g/m2, the oil 16 g/m2!
Please consult the technical leaflets of the Rubio Monocoat FR Base and the Rubio Monocoat FR Oil before application of the system.
* The colours are merely indicative. It is always recommended to make a sample in order to determine the exact colour.
Oil +2C component A is one part of 2- component oil. Use with accelerator
How to use: After sanding, clean the floor from the dust with vacuum cleaner and wash with Rubio Monocoat Cleaner or with clean water. Let the floor dry. Mix oil (A) and acclelerator (B), 3 part oil and 1 part accelerator (example 100g oil and 30g accelerator). Average cost 30-50 m2/l.
Rubio Monocoat accelerator use with product Rubio Monocoat OIL+ 2C. Mix oil and accelerator- 3 portion oil ja 1 portion accelerator (example 100 g oil ja 33 g accelerator). Mixed oil remains 8-12 hours. Stay in dry and original package.
Available 75ml and 300 ml.