1-layer oil RMC PreColor Easy
In order to create special contrasts, one can opt for a pre-colouring from the Rubio Monocoat Precolor Easy palette.The combination of these precolours and our oil allows unlimited creative and aesthetic possibilities.The colours available can be mixed.
Easy to apply with a pad, for even colouration!
Do not use this product without consulting the full instruction and technical sheet.
For routine cleaning of oiled floors. Thoroughly removes all dirt and grease without leaving a layer.Preserves the matt, natural appearance of the wood. Rubio Monocoat Soap is concentrated and therefore utmost economical.
With Rubio Monocoat Universal Maintenance Oil,we offer a gentle and natural method to maintain all oiled wood floors, regardless of the original oil product used.This product can also be used on varnished surfaces that start to show micro cracks.
– Adds gloss to the surface.
– Specifically suited for ‘high traffic’ zones.
– Universal use.
– Contains 0% VOC!
Extremely suitable for floors that require extra protection such as public areas, offices, restaurants, hotels, etc.
White, Black, Brown, Grey and Pure.
These colours are suitable for maintenance of all of our standard oil colours, but are not identical to them.
Rubio Monocoat Grease Remover is a ready-to-use product that removes recent grease stains from a surface treated with Rubio Monocoat Oil.The product should be applied immediately after the stain occurs, thereby preventing the grease from penetrating the surface.
Certificate Bfl-s1 tested according to the standard EN 13501-1: EN ISO 11925-2 and EN ISO 9239-1.
The Rubio Monocoat FR Oil System is an effective combination of two fire-retardant products:
– RMC FR Base: fire-retardant primer
– RMC FR Oil: fire-retardant finishing oil
The unique characteristics of the RMC FR Oil System:
– No build-up of layers, no saturation.
– No solvents or water, 0% VOC.
– Available in all standard interior RMC-colours.
– Manual and industrial application.
– Recommended partner for the project market!
– Optimal performance: low consumption.
What makes the Rubio Monocoat FR Oil System so unique?
Oil, no film forming
The Rubio Monocoat FR Oil System is the first fire-retardant oil system in the world that has acquired a Bfl-s1 certification for oak. Because it is based on our technology, there is no build-up of layers as in many other existing systems.
Research has shown that the inclusion of salts can significantly lower the durability of fire retardant systems Most fire-retardant systems contain salts. Our technology has enabled us to eliminate salts resulting in sustained product performance.
Limiting the development of smoke
Statistics indicate that smoke considerably reduces the ability to rescue people. In developing this product, we’ve striven to the utmost extent to limit smoke development. Our system gets an s1-citation, which attests to a safer product.
High spread rates and reduced product application have always been our goal. The Rubio Monocoat FR Oil System meets the economic criteria that we have set: the base consumes 35 g/m2, the oil 16 g/m2!
Please consult the technical leaflets of the Rubio Monocoat FR Base and the Rubio Monocoat FR Oil before application of the system.
* The colours are merely indicative. It is always recommended to make a sample in order to determine the exact colour.
Oil +2C component A is one part of 2- component oil. Use with accelerator
How to use: After sanding, clean the floor from the dust with vacuum cleaner and wash with Rubio Monocoat Cleaner or with clean water. Let the floor dry. Mix oil (A) and acclelerator (B), 3 part oil and 1 part accelerator (example 100g oil and 30g accelerator). Average cost 30-50 m2/l.