1-layer oil RMC Exterior Wood Cleaner

Brand:
Price:
21,55 €
Qty.: - +

For the cleaning of wooden patios, fences, exterior doors, carports, etc… Removes grey discolouration, mildew stains and dirt. Can be applied on all types of wood.New, weathered as well as treated wood must always be cleaned with Rubio Monocoat Exterior Wood Cleaner before applying one of our Exterior oils.

Advantages:

New wood: Grease that by nature appears in certain types of wood is removed. The natural pigment is cleansed and – as a result – the colour applied afterwards remains stable later on. The pores are opened, which provides more even results.
Weathered and treated wood:
The treatment will degrease and restore the wood. This results in a far more equal colour, which enables better management of the end result.
Do not use this product without consulting the full instruction and technical sheet.

 
Similar products
1-layer oil RMC PreColor Easy

In order to create special contrasts, one can opt for a pre-colouring from the Rubio Monocoat Precolor Easy palette.The combination of these precolours and our oil allows unlimited creative and aesthetic possibilities.The colours available can be mixed.

New formula:
Easy to apply with a pad, for even colouration!

Do not use this product without consulting the full instruction and technical sheet.

From 13,70 €
1-layer oil RMC Surface Care

Rubio Monocoat Surface Care is the handy, ready-to-use version of Rubio Monocoat Soap.Very suitable for smaller surfaces and to remove local stains on parquet floors, living room tables and work counters …

16,20 €
1-layer oil RMC Soap

For routine cleaning of oiled floors. Thoroughly removes all dirt and grease without leaving a layer.Preserves the matt, natural appearance of the wood. Rubio Monocoat Soap is concentrated and therefore utmost economical.

16,20 €
1-layer oil RMC FR Oil System

Certificate Bfl-s1 tested according to the standard EN 13501-1: EN ISO 11925-2 and EN ISO 9239-1.

The Rubio Monocoat FR Oil System is an effective combination of two fire-retardant products:
– RMC FR Base: fire-retardant primer
– RMC FR Oil: fire-retardant finishing oil

The unique characteristics of the RMC FR Oil System:
– No build-up of layers, no saturation.
– No solvents or water, 0% VOC.
– Available in all standard interior RMC-colours.
– Manual and industrial application.
– Recommended partner for the project market!
– Optimal performance: low consumption.

What makes the Rubio Monocoat FR Oil System so unique? 

Oil, no film forming 
The Rubio Monocoat FR Oil System is the first fire-retardant oil system in the world that has acquired a Bfl-s1 certification for oak. Because it is based on our technology, there is no build-up of layers as in many other existing systems.

No salts 
Research has shown that the inclusion of salts can significantly lower the durability of fire retardant systems Most fire-retardant systems contain salts. Our technology has enabled us to eliminate salts resulting in sustained product performance.

Limiting the development of smoke 
Statistics indicate that smoke considerably reduces the ability to rescue people. In developing this product, we’ve striven to the utmost extent to limit smoke development. Our system gets an s1-citation, which attests to a safer product.

Low consumption 
High spread rates and reduced product application have always been our goal. The Rubio Monocoat FR Oil System meets the economic criteria that we have set: the base consumes 35 g/m2, the oil 16 g/m2!

Please consult the technical leaflets of the Rubio Monocoat FR Base and the Rubio Monocoat FR Oil before application of the system.

* The colours are merely indicative. It is always recommended to make a sample in order to determine the exact colour. 

From 49,22 €
1-layer oil RMC Tannin Remover

Rubio Monocoat Tannin Remover is a ready-to-use product for removing stains and spots on wood caused by a reaction to acid and water. The product can be used on untreated, oiled and waxed surfaces. Also suitable for outdoor applications.
Spray RMC Tannin Remover on the spot or stain. Allow several minutes for absorption. Use a damp cloth to remove the stain. To remove stubborn stains, it is recommended to repeat the process until the desired result is achieved. Allow the surface area to dry. If the protective layer is affected, treat the surface area again with Oil +2C.

32,39 €