1-layer oil RMC Cleaner
This cleaner is used after sanding and vacuum cleaning the untreated wood and before the application is started. With this cleaner you will be able to remove even the smallest dust particles; the perfect start of an impeccable finish.
This product can also be used to clean the used materials after the oil application.
Certificate Bfl-s1 tested according to the standard EN 13501-1: EN ISO 11925-2 and EN ISO 9239-1.
The Rubio Monocoat FR Oil System is an effective combination of two fire-retardant products:
– RMC FR Base: fire-retardant primer
– RMC FR Oil: fire-retardant finishing oil
The unique characteristics of the RMC FR Oil System:
– No build-up of layers, no saturation.
– No solvents or water, 0% VOC.
– Available in all standard interior RMC-colours.
– Manual and industrial application.
– Recommended partner for the project market!
– Optimal performance: low consumption.
What makes the Rubio Monocoat FR Oil System so unique?
Oil, no film forming
The Rubio Monocoat FR Oil System is the first fire-retardant oil system in the world that has acquired a Bfl-s1 certification for oak. Because it is based on our technology, there is no build-up of layers as in many other existing systems.
Research has shown that the inclusion of salts can significantly lower the durability of fire retardant systems Most fire-retardant systems contain salts. Our technology has enabled us to eliminate salts resulting in sustained product performance.
Limiting the development of smoke
Statistics indicate that smoke considerably reduces the ability to rescue people. In developing this product, we’ve striven to the utmost extent to limit smoke development. Our system gets an s1-citation, which attests to a safer product.
High spread rates and reduced product application have always been our goal. The Rubio Monocoat FR Oil System meets the economic criteria that we have set: the base consumes 35 g/m2, the oil 16 g/m2!
Please consult the technical leaflets of the Rubio Monocoat FR Base and the Rubio Monocoat FR Oil before application of the system.
* The colours are merely indicative. It is always recommended to make a sample in order to determine the exact colour.
Rubio Monocoat Invisible Oil System is two component product, what gives wood a total protection without changing the tone. Invisible Oil System contains two components Invisible Oil ja Invisible Maintenance Oil.
Instruction: Sand the surface. Remove buffing dust with soft brush vacuum cleaner and then clean with Rubio Monocoat cleaner. When the surface is dry, use Invisible oil. Process maximum 5-10m² area at once. Let oil respond some minutes and then remove redundant oil.
Let oiled surface dry at least 12 hours and ensure good ventilation in the room. Then use Inivisible Maintenance Oil.
- Products RMC Invisible Oil and Invisible Maintenance Oil do not mix together!
- Product RMC Invisible Oil does not fit RMC Oil+2C B-component(accelerator)!
- Use product only sanded surfaces!
Oil +2C component A is one part of 2- component oil. Use with accelerator
How to use: After sanding, clean the floor from the dust with vacuum cleaner and wash with Rubio Monocoat Cleaner or with clean water. Let the floor dry. Mix oil (A) and acclelerator (B), 3 part oil and 1 part accelerator (example 100g oil and 30g accelerator). Average cost 30-50 m2/l.
Oil +2C komponent A on osa kahesüsteemsest õlist. On mõeldud kasutamiseks koos kinnitiga (komponent B).
Kasutamine: Puhasta peale lihvimist põrand tolmust tolmuimejaga ja pese puhtaks kas Rubio Monocoat Cleaneri või puhta veega. Lase põrandal täielikult kuivada. Sega omavahel õli (A) ja kinniti (B), suhtes 3 osa õli ja 1 osa kinnitit (nt. 100g õli ja 30g kinnitit). Valmis segatud õli säilib 4-6 tundi, pärast seda see kivistub. Soovituslik on segada algselt valmis väiksem kogus, kui ära kulub, sest õlitamise käigus selgub reaalne kulu. Keskmine kulu 30-50 m2/l.
Välja on toodud tüki hind.